Category: Household Repairs

Garage Doors Maintenance Tips

Household Repairs

In the past years and even very common today, robberies occurred in many homes either through the garage or in the garage. This is one of the prominent reasons why garage doors should be kept in good working conditions with a working remotely controlled garage door opener.

Maintenance of the garage door is however, dependent on individual homeowners, as there are differences in the level at which one cares for one’s property than the other.

The truth is just that one can easily carry out some garage maintenance and safety of oneself (or maybe by viewing and learning from online resources), but it is very essential that, if one is not comfortable with handling the following maintenance tips to contact a garage door repair expert (preferably the company that originally installed your garage door).

Please make sure everyone in the house is aware that the garage door is being checked and it shouldn’t be closed or opened until you are through. This should not be overlooked to avoid injuries and unwanted situations at home.

Visual Inspection

garage door springs This inspection tip could also be referred to as the” look and listen tip” and it should be carried out every month. This involves:

  • Standing in the garage with the garage door closed, looking over the garage door cable, rollers, springs, pulleys, hinges for any sign of damage or wear and tear.
  • Check for cable fraying and loose mounting hardware like the hinges.

If something seems unusual or not right, have a technician inspect the garage door

Door Balance Test

This maintenance tip could be carried out by easily

If your garage door is outfitted with the automatic/remote opener system, it is advisable to close the door and disengage the automatic opener and try to lift the garage door manually. One can determine is one’s garage door is balanced or not, if it is hard to open or does not remain open. But, ideally, it should open easily with little resistance and remain in that position (fully opened).

But if it doesn’t open or does not maintain the opened position, have the door serviced by a trained technician.

Reverse Mechanism Test

This type of maintenance is ideal for the automatic opener type of garage door. It is carried out with the help of a block of wood. The processes:

  • Make sure the door is fully opened
  • Place the wood at the center of the door opening, it should be the exact place where the garage door would touch the floor
  • Close the door with the transmitter or opener.
  • If the door touches the wood and does not automatically reverse up, the door sure does need to be serviced by a trained technician



Force Setting Test

This is applicable to garage doors with automatic opener.

  • Open the garage door and ensure it is fully opened
  • Close the door with the remote or transmitter
  • As the garage door is closing, try to hold it not to close with your hands stretched out and firm. If the garage door does not reverse its direction and continues to close, draw your hands away straight away. This implies that the closing force is too much and it should be serviced by trained a technician


Grease up moving parts like the hinges, tracks and rollers. This should take up to 10 minutes of your time, which is not too much to prolong the operation of your garage door system.

Prolong your garage door life

Maintaining your garage door on a regular basis would help you prolong your garage door life and help you to prevent unexpected expenses. I hope you have found this article to be informative and interesting.

Does your House’s Electrical Grounding System Had to be Updated?

Household Repairs

You’re not alone if you don’t thoroughly understand the importance of electrical grounding and bonding in your home. Lots of property owners take this specific safety preventative measure for given despite the fact that it is among the most essential aspects of any safe house. What precisely is correct bonding and grounding, and why is it essential?

certified electricianElectrical Bonding and Grounding, Explained
The electrical grounding system on your home supplies a path in between your home’s service box and the earth. The grounding system’s primary function is to divert charges from the lighting strikes and built up fixed electricity.

If lightning strikes near the utility’s transformer, some of the energy might be moved to the house’s electrical system. With correctly set up grounding, the energy has to safe path to go. When grounding is not set in place, tragedies can occur such as damaged equipment and electrocution.

Have Your Electrical System Updated
In a lot of cases, the electrical grounding system has to be updated because the electrodes and ground wires have actually become rusty or damaged. The electrical charge will not be effectively dissipated when this happens. Rather, it can travel into your house, as formerly discussed, via electrical wires. This phenomenon can trigger severe damage and fires.

Important Tips For Maintaining Your Garage Door

Household Repairs

Do you have garage doors and you are wondering how you can preserve them? Here are some of simple golden suggestions that will allow you to keep your garage doors. It is very important to ensure that you practice such ideas so regarding ensure that your garage doors services you for a long time. It is also crucial to guarantee that you call a dependable garage door service provider.

Opener maintenance

Garage door openers should constantly be lubed. This is to decrease friction that may result in wear and tear. Lubrication also plays a fundamental role in ensure that the efficiency of the door is increased. This minimizes energy wastage in case of electrical garage door and thus decreasing energy costs costs.

Hinge, bolts and movable parts maintenance
The best maintenance that you can offer garage door movable parts is to oil. This plays an essential role in the decrease of friction. It is also essential to ensure that you all hinges and bolts are always tightened so regarding increase the level of performance. As such, it is fundamental for you to have a garage door maintenance kit so regarding ensure that such basic upkeep tips are achieved without speaking with an expert garage door provider.

Garage door sensing units

It is wise to ensure that your garage door sensors are put in a safe location away from a potential danger of mechanical damage. You can always pre-test the garage door so as to make sure that the sensing units are working effectively.

In conclusion, you should always ensure that parts of the garage door are preserved on routine basis.

Garage Door Repair Denver

Roofing Repair After Storm Damage

Household Repairs

Spring has finally arrived and along with flowers and warmth, it also means the start of the storm season in Colorado. Tornadoes and thunderstorms are quite common as the weather warms up and many people will find themselves dealing with hail damage or other roofing issues related to these storms. As a homeowner, you need to act quickly if roofing damage happens to you. A roof inspection should take place right away to assess the damage and possibly prevent any other damage from occurring. Often, a roof can be repaired rather than replaced, but quick action is crucial. Call a local company for your Denver roof repair work.

Take These Steps Before You Contact A Roofing Company

Check the inside of your house as well. It might seem strange to check inside for roofing damage, but the truth is that damage to your roof can cause leaking, which would leave water stains, cause paint to chip, or cracking in the ceiling. If left unattended for very long, the cost to repair will go up considerably.

Visibly check your roof for dented or damaged shingles after a storm. Blistering or other signs of storm damage should be repaired right away. Inside damage can possibly take longer to appear, so it’s important that you check carefully on the outside.

Arrange for an inspection from a Denver roofer. These are usually free since these companies want your business. They know that if you file an insurance claim, a separate adjuster from that company will also come to give an inspection, so you don’t usually have to worry about dishonesty from the roofing company.

Be sure to get any estimates in writing! Make certain that it includes clearly ALL the costs of repairs. Many times, the insurance company will send the reimbursement check directly to the roofing company rather than to the homeowner, in order to prevent misuse of funds. You should completely understand the repairs that need to be done and all the costs, so that you don’t end up with any surprise out-of-pocket expenses.

The moral of the story here is to get roofing repairs done as quickly as possible, even if the damage is seemingly minor. Little problems can easily lead to big problems that can wreak havoc in the life of a homeowner, so be sure to take action if you think a storm has damaged your roof. In most cases, your homeowner’s insurance policy will cover these repairs, so there’s no reason to delay it. Remember—your roof is your protection against the elements, so take care of it in a timely manner and it will serve you well for years to come!

What You Need to Know about Pressure Washing?

Exterior RenovationHousehold Repairs

What is Pressure Washing?

Pressure Washing (also known as Power Washing, Steam Cleaning, and Water Blasting) is the process of using high pressure (1,000 to 5,000 psi) water jets for cleaning, demolition, paint or dirt removal, and similar applications. The water may be heated to near 220 degrees Fahrenheit, or at ambient temperature.

“Pressure” is measured in PSI (pounds per square inch). Pressure is what loosens the dirt from the surface being cleaned. The higher the pressure, the more force is available for cleaning.

“Flow” is measured in GMP (gallons per minute). Flow is what carries the loosened dirt away. Every pressure washer has a minimum GMP and PSI of water that must be supplied to the unit for it to function as designed.

The combination of pressure and flow is what determines how fast a pressure washing project can be completed. High pressure and high flow are required in order to properly complete a job in a timely manner. This requires expensive, professional equipment. Low budget equipment will yield high pressure with low flow or low pressure with high flow, both of which will slow down the pressure washing project down.

Cleaning effectiveness may be enhanced with the addition of certain chemicals compounded specifically for power washing and the particular problem being treated (oil, grease, etc.). One reason for heating the water used for pressure washing is because hot water requires less chemicals to complete the power washing project.

Why is Pressure Washing Necessary?

power washing - before and afterHumid climates can allow the rapid accumulation of organisms like algae, mold, and mildew to take root on just about every surface on the exteriors of your home or place of business. Dry climates similarly produce dirt, grime, cobwebs, mold, and mildew that accumulate and rob your home or place of business exteriors of their original luster and sheen. This includes siding, dumpster and trash areas, brick pavers, concrete driveways, and more.

These problems, if not dealt with, can result in dangerous or hazardous conditions for people, equipment, and vehicles. Also, if your facility was the subject of a surprise OSHA inspection, many of these problems could result in serious fines.

In addition, things like graffiti, paint and oil spills, or stains make a poor impression on your business and prospective customers. You only get one chance to make a 1st impression.

Power washing is often used as a highly effective, relatively low cost way to deal with these problems.

Typical surfaces suitable for pressure washing:

  • Most types of exterior surfaces, including stucco, masonry, wood and metal siding
  • Fences and decorative surfaces
  • All types of concrete slabs including patios, sidewalks, driveways, interior floors in warehouses and industrial structures
  • Swimming pool decks
  • How often should Pressure Washing be Done?

Pressure washing is usually done on an “as needed” basis. However, we recommend scheduling pressure washing on a regular basis as a form of maintenance to help homes, businesses, and other areas keep their value or restore them to what they should be.

One-time power washing is frequently used to clean a surface prior to painting.

Power washing can also be done on a regularly scheduled program. This is often the case for store fronts and entry sidewalks, signage, high foot or vehicular traffic areas, and containers and areas subject to frequent spills such as trash bins and surrounding areas.

Is Pressure Washing Dangerous?

Power washing is not inherently dangerous. However, whenever any power tool is used, it must only be used by a trained operator, in strict accordance with the manufacturer’s instructions, and following all recommended precautions and safety measures.

The power washing jet is strong enough to peel paint and remove dirt and oil from concrete. If the jet comes in contact with your skin, it can cause damage the flesh. A simple Internet search for “power washing accidents” or “pressure washing accidents” will result in numerous injury related stories.

Pressure Washing Misconception

“The lowest power washing bidder is always the one you should hire.”

This is rarely a good policy for the following reasons:

  • Low bidders may use unskilled and uninsured “day laborers” which could put you in liability danger if a day laborer is injured on your job.
  • They may also lack required and appropriate liability and worker’s compensation insurance.
  • They may use inferior materials and equipment.
  • The lowest bidder may have missed or simply not bid an important aspect of the job, hoping you won’t catch it and they can tack it on as an “extra charge”.
  • Low bidders may tack-on extra charges when they hand you their final bill.
  • Get at least 3 quotes from different pressure washing companies. Before comparing prices, be sure all contractors are bidding exactly the same thing. Be extremely suspicious of an unusually low or high bid.

How to Choose a Pressure Washing Contractor?

Get at least 3 power washing quotes.
Avoid any contractor who charges for an estimate.
Insist on being listed as “additionally insured” on the contractor’s liability, worker’s compensation, and vehicle liability insurance policies.
Be sure the contractor states, in writing in your quotation, that they will not use “day labors” or uninsured labor on your job.
Ask for power washing references, and check them out carefully.

Garage Door Springs – You’ll Miss Them When They Break!

Household Repairs

Garage door springs.  OK, so they’re not very exciting, but if you have a garage door that has a spring operation, then they’re a pretty important component for your doors functionality.

A typical example of a spring operated garage door is an overhead type which is made up of a number of panels attached to each other with hinges. These are then guided by rollers along a track, with the weight being balanced by a pair of extension springs or a torsion spring system.

You may never need to replace your garage door springs, but generally speaking, if one gives up on you, that could be a good indication that the other one isn’t too far behind. With this in mind, it pays to have an idea of the cost you could be looking at to have them replaced.

garage door repairsObviously, it’s always best to shop around instead of taking the first quote you get. And don’t assume that the big service dealers are always going to give you the best deal, because sometimes they don’t!

The best thing to do is to get three or four quotes – one from a big dealership and the others from local, established companies. All of them should be able to give you a ball park figure. And don’t forget personal recommendations – either from people you know or from internet forums. There’s nothing better than word of mouth!

Whilst you’re calling around for quotes for spring replacements, it’s a good idea to ask how much it will cost to have the door serviced at the same time. If it’s not cost prohibitive, it makes sense to have an engineer lubricate all the parts and check the mechanism whilst he’s doing the job.

Generally speaking, you can expect to pay around $200 for a couple of torsion springs – depending on who does the job, it could cost you more, but it could cost less.  Of course, if you’re able to do the work yourself, you’ll reduce your costs considerably, but unless you’re really sure of what you’re doing, it’s probably best to bring in a professional garage door repair company.

Incidentally, it’s worth noting that the lifespan of garage door springs is not necessarily determined by the number of years you have them, but more by the number of up and down movements they have to perform during their life.

Garage door springs – you don’t know how much you’ll miss them until they break!

Water Damage And The Effects On Your Indoor Environment

Household Repairs

The topic of water damage and mold has become a somewhat controversial topic. There are numerous opinions on the topic when it comes to clean up. But one aspect of water damage that everyone can agree on is that water damage will lead to mold if the water damage isn’t cleaned up quickly and properly. The affects of water damage on the Indoor Environmental Quality (IEQ) and health of the occupants varies greatly and is less understood.

Wikipedia’s definition of water damage:

Water damage describes a large number of possible losses caused by water intruding where it will enable attack of a material or system by destructive processes such as rotting of wood, growth, rusting of steel, de-laminating of materials such as plywood, and many others.

The damage may be imperceptibly slow and minor such as water spots that could eventually mar a surface, or it may be instantaneous and catastrophic such as flooding. However fast it occurs, water damage is a major contributor to loss of property.

There are a number of reasons for water damage such as plumbing leaks, sewage problems, hail damage, leaking crawl spaces and attics and natural disasters to name a few. Regardless of the cause for your water damage, it needs to be dealt with quickly and properly to protect the building and it’s occupants from potential health risks. Water damage can also damage the structural integrity of a building.

tech doing water damage cleanup in basement
Water Damage Cleanup

The Institute of Inspection, Cleaning and Restoration Certification (IICRC) standards call for mitigation procedures to begin as soon as safely possible after the initial loss. Overtime the quality of the water will deteriorate and when this happens the greater the damage will be to the structure and its contents. In addition, the potential for environmental hazards will increase and are more likely to develop.

Some of the environmental changes taking place after water damage has occurred are:

  • Mold and bacteria amplification
  • Parasitic infestations
  • In some instances, viruses can be transmitted

These things come from indoor and outdoor environments that naturally harbor microscopic life forms in varying degrees –  known as microbes. Microbes are simply these tiny one celled organisms like bacteria, fungi and viruses. These microbes flourish when they are exposed to excess moisture for a prolonged time period.

Because the health effects associated with water damage, the IICRC developed a classification for the for the water damage based on the water quality. This helps remediators,  property owners and other interested parties to determine the necessary actions to take for proper health and safety.

Understanding the risks and potential problems means that quickly dealing with restoration water damage in Indianapolis and other areas that are susceptible to flooding is imperative. Protect your property by acting quickly and finding a restoration company that follows environmentally friendly remediation processes.

IICRC Certified Water Damage Restoration